MENU
Home > skf bearing > SKF 51105 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact
SKF 51105 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact

SKF 51105 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact

Heavy Equipment Parts & Accs>Manufacturing Equipment Parts>Bearings>See more SKF 51105 Single Direction Thrust Bearing 3 Pi... SKF 51105 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact   SKF 51105 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact Angle, ABEC 1 Precision, Open, Steel Cage, 25mm…
Contact Us Now !

Product description

Heavy Equipment Parts & Accs>Manufacturing Equipment Parts>Bearings>See more SKF 51105 Single Direction Thrust Bearing 3 Pi…

SKF 51105 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact

 

SKF 51105 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact Angle, ABEC 1 Precision, Open, Steel Cage, 25mm Bore, 42mm OD, 11mm Width, 6520lbf Static Load Capacity, 3570lbf Dynamic Load Capacity

For lots of other items, visit My Store


Description

This SKF single-direction, three-piece thrust ball bearing has an Annular Bearing Engineers’ Committee (ABEC)-1 precision rating, grooved races, a 90-degree contact angle, a pressed steel cage, and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in one direction and no radial loads. This deep-groove thrust ball bearing has a three-piece construction with a housing locating washer (ring), a shaft locating washer, and a ball and cage assembly. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The single-row design supports thrust loads in a single direction and tolerates axial deflection, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and outer raceway contact points are on a plane parallel to the axial load, which enables the bearing to receive high axial force. The balls and washers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the pressed sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. This bearing is separable so it mounts more easily than nonseparable bearings because its components can be installed independently. It can be used at operating temperatures from -34 degrees C to 125 C (-30 degrees F to 257 F), and it has an ABEC-1 rating for tight dimensional tolerance, making it useful in applications that require high accuracy and increased operating efficiency. This thrust ball bearing is suitable for applications including machine tool drive shafts, automotive steering gears and clutches, rotary tables, outboard motor propellers, and household appliances.

Specifications

Main bearing dimensionsISO 104:2002Basic dynamic load ratingsDIN ISO 281Dimensional and geometric tolerancesISO 199:1997, tolerance class PNThrough-hardening steel for inner and outer rings and rollersISO 683-17Pressed sheet steel for cage(DIN) EN 10111:1998Load carrying capacity and lifeISO 281:1990System for creating part numbers for rolling bearingsDIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

SKF Group manufactures bearings and units, seals, mechatronics, and lubrication systems that meet International Organization for Standardization (ISO) 14001 and 9001, and Occupational Health and Safety Assessment Series (OHSAS) 18001 standards for quality assurance. The company, founded in 1907, is headquartered in Göteborg, Sweden.


Features

    Single direction, deep-groove thrust ball bearing for applications that support heavy axial loads in one direction
    Open bearing for lubrication applied in place
    Through-hardened chromium steel for durability and resistance to deformity under heavy loads
    Pressed sheet steel retainer evenly spaces rollers for reduced friction, vibration, and noise
    Grooved raceways for higher speeds and thrust-bearing capacity than flat washers


Additional Information

    Manufacturer: SKF
    Shipping Weight: 10
    Product Dimensions:
    Width: 1.30
    Length: 1.80
    Height: 0.50

 

Free shipping to the lower 48 states! Most items will ship within 24 hours of receiving payment.

All items ship from the USA!

Don’t forget to check out My Store


Terms and Conditions

Payment

    We accept Paypal only
    All purchases require instant payment Pay worry free – Paypal offers both buyer and seller protection against fraud

Returns

    There is a 30-day return policy for a refund.
    Returned items must be in original packaging and in original condition.
    We do not cover postage for returned items.
    After we receive your returned item, please allow up to 1 week for us to process the return and refund your Paypal account.

Shipping

    Items will be shipped by USPS, UPS, FedEx, or other freight carrier depending on your location and item.
    All items are shipped from the USA.
    Our handling time is 2 business days to prepare your package. Please allow up to 4 additional business days for your package to arrive. If you choose upgraded shipping, please allow 2 business days in addition to our handling time.

Our Guarantee

    All items include our 100% Satisfaction Guarantee. If you are not happy with your purchase for any reason, please contact us within 7 days after receiving your item. We will do everything we can to resolve the problem.
    We want your eBay experience to be a good one. As you can tell from our feedback, almost every customer is a happy one.
    Our goal is always a satisfied customer. In the rare case something goes wrong, before leaving negative feedback, please contact us so we can help make it right!

By committing to buy you are agreeing to the Terms & Conditions stated above.

 

Leader Singapore is authorized dealers in interchange all bearing types, including SKF 51105 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact McGill CAMROL Cam Followers fag nsk skf timken ina koyo bearing configurations and advanced products such as housed units, integrated bearing assemblies, precision assemblies and cam followers, radial bearings, and thrust bearings. They are all available with a variety of options and clearances.
SKF 51105 Single Direction Thrust Bearing, 3 Piece, Grooved Race, 90° Contact was been used on markets bearings, transmissions, gearboxes, belts, chain and related products, and offers a spectrum of powertrain rebuild and repair services. The Leader Singapore leading authority on tapered roller bearings.

Please Contact Us !

Click