Product description

NACHI IPH-22B-3.5-3.5-11 IPH Series Double IP Pump

Our mission is to serve our customers as a trusted ally, providing you with the loyalty of a business partner and the economics of an outside vendor. Since many vacuum processes are critical steps in applications, we vow to make sure that our customers have what they need to run their vacuum equipment and processes with maximum efficiency and reliability. We will be there when you need us.if you’re looking for Hydraulic Pumps,Pumps,Hydraulic Motors,Motors,Hydraulic Cylinder,Air Cylinders,Solenoid Valves,Pressure Valves,Check Valves, Flow Valves, Proportional Valves, Filter Elements,Fittings,Gas Claw,Vacuum,Connectors,Components and Accessories,Auto spare parts, then you’ve come to the right place., enable Leader to greatly enhance quality deeply and broadly, and continue towards the top goal; with rigorous and far-reaching quality strategy and perseverance

 

 

 

All the types in this new design (11D) series are installation compatible with the previous design (10D). Note, however, that there is no longer compatibility for some of the seal components between the IPH-3 and IPH-4 sizes and the 3 and 4 sizes.

1) Configured with the high-pressure, low-noise IPH Series and IP pumps, these double pumps greatly expand the range of application for the IP pump.

2)A wide selection of pump combinations provides options that are perfect for just about any type of application imaginable.

 

 

 

 

Note) 1.Maximum Pressure: Maximum pressure limit when there are frequent pressure changes. However, maximum pressure is the same as rated pressure when load is applied to the head

side and shaft side simultaneously.

2.Suction Pressure: +0.02 to +0.3 MPa {−0.2 to +0.3 kgf/cm2}

3.Avoid installation with the suction port towards the bottom of the pump. If the revolution speed will exceed 1800mm-1, provide separate piping for shaft side and head size IN ports.

4.Specify using the model number format shown below when pipe flange is required.

5.Working pressure is continuous operating pressure when the same pressure exists on the head side and shaft side.

6.Individual pump perform performance on the head side and shaft side is the same as that of the single pumps. Required power is the sum of the power required by each of the two

pumps.

7.The "Required Power at 1200min-1, 21MPa (kW)" column in the above table are based on combinations that provide the maximum capacity for each model number, when pressure at

both the head side and shaft side is 21MPa. Examples of combinations that provide "the maximum capacity for each model number" are IPH-22B-8-8-11 for IPH-22b, and IPH-46B-32-

125-11 for IPH-46B. A capacity of 125 for all *6B Type 6 pumps is used for calculations.

 

 

 

The common pump stock list we have:

 

IPH-22B-3.5-3.5-11	IPH-55B-40-40-11
IPH-22B-3.5-5-11	IPH-55B-40-50-11
IPH-22B-3.5-6.5-11	IPH-55B-40-64-11
IPH-22B-3.5-8-11	IPH-55B-50-50-11
IPH-22B-5-5-11	IPH-55B-50-64-11
IPH-22B-5-6.5-11	IPH-55B-64-64-11
IPH-22B-5-8-11	IPH-56B-40-100-11
IPH-22B-6.5-6.5-11	IPH-56B-40-125-11
IPH-22B-6.5-8-11	IPH-56B-40-80-11
IPH-23B-3.5-10-11	IPH-56B-50-100-11
IPH-23B-3.5-13-11	IPH-56B-50-125-11
IPH-23B-3.5-16-11	IPH-56B-50-80-11
IPH-23B-5-10-11	IPH-56B-64-100-11
IPH-23B-5-13-11	IPH-56B-64-125-11
IPH-23B-5-16-11	IPH-56B-64-80-11
IPH-23B-6.5-10-11	IPH-66B-100-100-11
IPH-23B-6.5-13-11	IPH-66B-100-125-11
IPH-23B-6.5-16-11	IPH-66B-125-125-11
IPH-23B-8-10-11	IPH-66B-80-100-11
IPH-23B-8-13-11	IPH-66B-80-125-11
IPH-23B-8-16-11
IPH-24B-6.5-25-11
IPH-24B-6.5-32-11

 

 

 

 

For more information, please download the below IPH Series Double IP Pump datasheet:

IPH Series Double IP Pump

Contact Person :Mr. leader
Job Title : General Manager
Email : [email protected]
Worktime : 9:00-18:00 (Beijing time)
Business Phone : 86-531-82633958(Working time)
If you have any questions about our products, please feel free to contact us,
we will try our best to find suitable products for you!
We are committed to NACHI IPH-22B-3.5-3.5-11 IPH Series Double IP Pump